Wrinkling Paint and the Solution: Vancouver’s Best Painters

A rough, crinkled surface usually occurs when there is interference with the normal drying time of the paint.  If the surface film dries before the bottom layer, the dry film will move and wrinkles will form.  Possible causes of wrinkling include the application of a second coat before the first one is thoroughly dry:  application of a hard finish over a softer coat without priming; painting in the hot sun or over too cold a surface; applying too much paint;  application over a glossy finish; or mismatching materials (eg epoxy on top of an alkyd)

Solutions for Wrinkling Paint suggested by Rick Anderson and Vancouver’s Best Painters.

First, the wrinkled layers must be removed.  If the underneath layers are still soft, they can be removed by scraping alone; but if they are aged, chemical paint removers or other removal methods may be needed.  Areas stripped to the bare wood should be primed and allowed to dry completely before the topcoat is applied.  To avoid wrinkling, bursh out each coat thoroughly and allow it to dry completely.  Deep tones may require more drying time.  Follow the manufacturer’s recommendations.  Do not paint in direct hot sunlight or when the temperature is below 40 degrees F or 5 C.

Rick Anderson www.vancouversbestpainters.com www.604painters.com www.vancouverindustrialpainting.com